How to work with regenerate

How to work with regenerate

To work with regenerate

Step 1

To work with regenerate, first, you must select the object.

Step 2

After that, use the mouse to open the View menu and then click the Regenerate command.

Step 3

Finally, you will see that the object has changed as shown by the picture below.

Edited By: Norasyikin Mahmud
© 2001 Inner Esteem
All rights reserved. All other product names and trademarks are registered properties of their respective owners.
170901

How to work with shading

How to work with shading

To work with shading

Step 1

To work with shading, first, you must use the mouse to open the Tools menu and then click the Shading command.

Step 2

Next, select the Method and the Range. After that, select the Display and then click the Ok button.

Step 3

Now, you will see that the object has changed.

How to change the color

How to change the color

To change the color

Step 1

To change the color, the first thing you must do is to use the mouse to open the Options menu. After that, click the Custom Color command.

Step 2

Next, you need to select the color that you want. You can also add a new custom color. After that, click the Ok button.

Step 3

Finally, you can try to draw the object and you will see that the object color has changed.

How to add the new material

How to add the new material

To add the new material

Step 1

If you would like to add the new material, first, use the mouse to open the Options menu and then click the Material command.

Step 2

Next, you need to click the Add button.

Step 3

Later, adjust the Option, enter the name and then click the Ok button. You can also click the Preview button to see the result.

How to change the Material

How to change the Material

To change the Material

Step 1

To change the material, first, you must use the mouse to open the Options menu and then click the Material command.

Step 2

Now, select the material that you want from the list box.

Step 3

You can try to draw an object and you will see that the object has changed.

How to display with 2-D Mode

How to display with 2-D Mode

To display with 2-D Mode

Step 1

To display with 2-D mode, let starts with the original display.

Step 2

After that, use the mouse to open the Option menu and then click the 2-D Mode command.

Step 3

Now, you could see that the image is in 2-D Mode.

How to work with Solid Add

How to work with Solid Add

To work with Solid Add

Step 1

If you would like to work with solid add, first, you must use the mouse to open the Solid menu and then click the Wall command.

Step 2

Then, set a point on each of the two solids.

Step 3

Finally, you will see that the two solids are being added to one group.

How to create the Wall

How to create the Wall

To create the Wall

Step 1

If you wish to create the wall, first, you must use the mouse to open the Solid menu and then click the Wall command.

Step 2

Next, you need to place the insertion point in the page.

Step 3

After that, just set two points in the opposite corner of the wall.

How to create the Rounded Box

How to create the Rounded Box

To create the Rounded Box

Step 1

If you wish to create the rounded box, first, you must use the mouse to open the Solid menu and then click the Rounded Box command

Step 2

Next, you need to place the insertion point in the page.

Step 3

Finally, set the two points opposite corner of the box.

How to create Pyramid

How to create Pyramid

To create Pyramid

Step 1

If you wish to create pyramid, the first thing you must do is to use the mouse to open the Solid menu and then click the Pyramid command.

Step 2

Next, you need to place the insertion point in the page.

Step 3

After that you ought to specify the

1. Base center point
   

2. Base edge point
   

3. Height point

How to create the Truncated Cone

How to create the Truncated Cone

To create the Truncated Cone

Step 1

If you would like to create the Truncated cone, first, use the mouse to open the Solid menu and then click the Truncated Cone command.

Step 2

Next, you need to place the insertion point in the page.

Step 3

After that, you need to specify the

1. Base center point
   

2. Base radius point
   

3. Height point
   

4. Top edge point

How to create the tube

How to create the tube

To create the tube

Step 1

If you want to create the tube, use the mouse to open the Solid menu first and then click the Tube command.

Step 2

After that, just place the insertion point in the page.

Step 3

After that, you need to specify the

1. Center point
   

2. Radius point
   

3. Length point
   

4. Thickness point

How to create the Torus

How to create the Torus

To create the Torus

Step 1

To create the torus, the first thing you must do is to use the mouse to open the Solid menu and then click the Torus command.

Step 2

Next, place the insertion point in the page.

Step 3

Later, you need to specify the

1. Torus center
   

2. Radius
   

3. Thickness

How to create the Cone

How to create the Cone

To create the Cone

Step 1

To create the cone, first, use the mouse to open the Solid menu and then click the Cone command.

Step 2

Next, you need to place the insertion point in the page.

Step 3

Later, you need to specify the center and the radius point. Finally, specify the Height point.

How to create the cylinder

How to create the cylinder

To create the cylinder

Step 1

If you would like to create the cylinder, first, you must use the mouse to open the Solid menu and then click the Cylinder command

Step 2

Next, place the insertion point in the page.

Step 3

Later, you need to specify the center point and then use the mouse to drag and draw the Cylinder.

How to create the Hemisphere

How to create the Hemisphere

To create the Hemisphere

Step 1

If you wish to create the hemisphere, use the mouse to open the Solid menu and then click the Hemisphere command.

Step 2

Next, place the insertion point in the page.

Step 3

Next, you need to specify the center point and use the mouse to drag and draw the Hemisphere.